StorageBatteriesEMS
What it says
The CEA (Measures relating to Safety and Electric Supply) Amendment Regulations, 2026 add a chapter on BESS safety. Published in the Gazette on 30 March 2026, in force from 1 April 2027.
Key provisions
- Two-fault tolerance against overcharge, over-discharge, short circuit and operation outside temperature limits.
- The BMS must monitor and record voltage, temperature and thermal runaway at cell, module and rack level, and stop charging and discharging above the maker's temperature limit.
- Containers need explosion protection, forced ventilation, gas, smoke, heat and flame detection, and automatic fire suppression.
- Sites need fencing of at least 1.8 m, CCTV, alarms, and automatic and manual emergency stops.
- An independent fire safety audit is due within three months of commencement, reported to the Electrical Inspector.
- Regulations 122(A) to 122(M) apply above 650 V; systems at 650 V and below must meet the relevant standards.