17 companies in 7 cities. Compare 67 products → About this equipment · Listed A–Z, not ranked · Reviewed November 2026

  1. AktiVolt

    BengaluruEst. 2019

    Website of AktiVolt (opens in a new tab)
  2. Website of Emiant Innovations (opens in a new tab)
  3. Exponent Energy

    BengaluruEst. 2020

    EV
    Website of Exponent Energy (opens in a new tab)
  4. Website of Fasmho Energy Systems (opens in a new tab)
  5. Factory: KuntlagudemISO 9001:2015
    Website of Innolia Energy (opens in a new tab)
  6. Liionergy

    Siliguri

    Factory: Siliguri
    Website of Liionergy (opens in a new tab)
  7. Factory: Noida
    Website of Lithion Power (opens in a new tab)
  8. Factory: Chhatrapati SambhajinagarEVEnergy storage
    Website of Maxwell Energy Systems (opens in a new tab)
  9. Website of OGO Energy (opens in a new tab)
  10. Website of ReVx Energy (opens in a new tab)
  11. Website of Shade Energy (opens in a new tab)
  12. TESAS Energy

    Est. 2026

    Website of TESAS Energy (opens in a new tab)
  13. Website of Tesscorn (opens in a new tab)
  14. EV
    Website of Vecmocon Technologies (opens in a new tab)
  15. Vision Mechatronics

    ThaneEst. 2009

    Website of Vision Mechatronics (opens in a new tab)
  16. AIS 156 Phase 2
    Website of Webber Electrocorp (opens in a new tab)
  17. Energy storageC&IEV
    Website of Xbattery (opens in a new tab)

About Battery management systems

A battery management system (BMS) is the electronics inside a battery pack that measures every cell's voltage and temperature, balances the cells and disconnects the pack if anything goes outside safe limits. It protects the battery; it does not decide how the battery is used across the day. The companies below design and make BMS hardware in India.

What to check before you buy

  • Supported chemistries and the number of cells in series it can manage.
  • Accuracy of cell voltage and temperature measurement, and how state of charge is estimated.
  • Passive or active balancing, and the balancing current.
  • Communication interfaces (CAN, RS-485/Modbus) and whether the protocol is documented for third parties.
  • Functional safety and certifications relevant to stationary storage or EVs.

Questions about battery management systems

What is the difference between a BMS and an EMS?
A BMS works inside the battery: it monitors and protects the cells. An EMS works at site level: it decides when the battery charges and discharges, alongside solar, diesel and the grid. A BESS needs both.
Can I change the BMS on an existing battery?
It is possible but rarely worth it; the BMS is tuned to the cells and is part of the pack's certification and warranty. It is far more common to add or replace the EMS above it.

Compiled from company websites and published industry lists, and written in our own words. Figures on each card are as the company publishes them, and the pages we took them from are under Sources on each profile; NA means not published. Logos belong to their owners and are shown only to identify each company. Ingro Energy is not affiliated with the companies listed, and they do not endorse Ingro EMS. Last reviewed November 2026. Spotted something out of date, or want your company added or removed? Write to us.

Not sure what to buy? Ask us what's compatible and what size fits your site.