Vikram Solar PowerHive P261

Listed A–Z, not ranked · Reviewed November 2026

As printed in the datasheet, checked November 2026 (the date we compared these figures with the maker's sheet). NA means not published.

Rating

Rated energy
261.248 kWh
Rated power
125 kW
Charge/discharge rate
0.5 P
Duration
2.1 h
PCS included
Yes
Cooling
Liquid

Battery

Cell capacity
314 Ah
Chemistry
LFP
DC voltage range
715–936 V
Cycle life
NA

Electrical

AC voltage
400 V
AC frequency
50-60
Round-trip efficiency
NA
Efficiency measured
NA

Physical

Size (mm)
1450 × 1330 × 2150 mm (W × D × H)
Weight
2650 kg
Enclosure rating
IP55

Environment

Operating temperature
-30–50 °C
Max altitude
NA
Noise at 1 m
NA

Safety

Fire suppression
Aerosol; dry water pipe; deflagration ventilation
Certifications
IEC 62619, UN 38.3, EN IEC 62477-1, EN IEC 61000-6-2/4
Model code:
P261
Checked:
November 2026, against the datasheet

Note

Max. power 137.5 kW; rated power shown.

Full datasheet

Every row the maker prints, copied as written, read 2026-11-15.

Overview

Model
Energy Storage System PowerHive P261ALL-IN-ONE LIQUID-COOLED ESS

Battery

Cell type
LFP; 314 Ah; 3.2 V DC
Cell configuration
1P52S x 5S
Rated energy
261.248 kWh
Nominal voltage
832 V DC
DC voltage range
715–936 V DC
Charge/discharge rate
0.5 CP
Cooling
Liquid Cooling
Cell balancing
Active Cell Balancing; 2A

Power and grid

Rated AC power
125 kW
Max apparent output
137.5 kW
AC voltage
400 V AC
Phases / wiring
3 P+ N+ PE (N Terminal is Reserved)
AC frequency
50–60 Hz
Isolation
Non-isolated
Operating modes
On-grid + Off-grid

Environment

Operating temperature
-30 to +50°C (Derating above 45°C)
Corrosion class
C4 (Up to C5 Available)

Physical

Size
1450 x 1330 x 2150 mm
Weight
2650 Kg
Enclosure rating
IP55; Outdoor

Safety

Fire suppression
Aerosol; Dry Water Pipe
Fire detection
Smoke Detector, Heat Detector, Combustible Gas Detector
Deflagration venting
Ventilation
Fire alarm
Sound + Light Fire Alarm
DC over-current protection
Fuse + Breaker
Surge protection
Type 2
Certifications
IEC 62619; UN38.3; EN IEC 62477-1; EN IEC 61000-6-2/4

Communication

Communication
LAN; CAN; RS485; I/O
BMS / EMS
5 x BMU + 1 x BCMU

Vikram Solar PowerHive P261, in short

The Vikram Solar PowerHive P261 is a cabinet BESS rated 125 kW, with cooling Liquid and PCS included. 9 other cabinet BESS at 125 kW are listed, from 6 makers.

Same size from other makers: Cygni Energy 125kW/261kWh Cabinet, Electres Electres Pro, GoodEnough Energy StorEDGE 0.25, Hanum Energy Cabinet 125, Statcon Energiaa SE-BESS 261, Sungrow PowerStack 255CS · All 125 kW side by side

Questions about the Vikram Solar PowerHive P261

What are the main specifications of the Vikram Solar PowerHive P261?
Rated 125 kW; Cooling Liquid; PCS included. As printed on Vikram Solar's datasheet (checked November 2026); the full list is on this page.
Where can I find the Vikram Solar PowerHive P261 datasheet?
Vikram Solar publishes it on its own website, and this page links to it. The figures here were last checked against it in November 2026.
What are the alternatives to the Vikram Solar PowerHive P261?
Other 125 kW cabinet BESS sold in India include Cygni Energy 125kW/261kWh Cabinet, Electres Electres Pro, GoodEnough Energy StorEDGE 0.25 and Hanum Energy Cabinet 125. All of them are compared side by side on the 125 kW page.
Who makes the Vikram Solar PowerHive P261?
Vikram Solar, with its head office in Kolkata.

Spot a wrong or outdated figure? Report a correction and we'll check it against the maker's current sheet.

Values as Vikram Solar prints them in the linked datasheet; NA means it doesn't publish that figure. Nothing here is tested by Ingro Energy, and Ingro Energy is not affiliated with Vikram Solar. Product and company names are trademarks of their owners, used only to identify the product.

Not sure what to buy? Ask us what's compatible and what size fits your site.