Micro-grids & Backup
Underway

Off-Grid Solar Micro-grids

Solar and battery micro-grids for four villages in Melghat with no grid and no diesel: 445 kWp of solar, about 1.55 MWh of storage, 820 homes. Ingro supplies the EMS, hardware and software.

Bijlee SolarMelghat, Amravati, Maharashtra
Isometric view of an off-grid village micro-grid in Melghat: rows of solar panels, one battery container and the Ingro EMS cabinet, feeding village homes through a line of distribution poles. There is no grid connection and no diesel generator. A thin 2G mast sends data to a cloud used for monitoring only. A card shows the battery's state-of-charge bands, from critical below 10 percent to full above 85 percent, and the four villages' 445 kWp of solar and 820 homes.2GEMS
Overview

The project in brief

Makhala, Bichukheda, Boratyakheda and Raipur are villages in Melghat, in Maharashtra's Amravati district, with no grid connection. Under a MEDA (Maharashtra Energy Development Agency) programme, Bijlee Solar is giving each one its own solar and battery micro-grid: 445 kWp of solar and about 1.55 MWh of storage across the four, serving 820 households. There is no grid and no diesel generator on the micro-grid. The battery and solar are the only source.

Ingro's scope is the EMS, hardware and software. It forms each village's grid, brings the micro-grid back from a complete standstill, sheds load feeder by feeder as the battery runs low, and runs entirely on site: the villages have only weak 2G connectivity, so the cloud is used for monitoring only. Sunvaaru supplies the battery, PCS and BMS; Bijlee Solar delivers everything else.

4
Villages
445 kWp
Solar
~1.55 MWh
Storage
820
Homes
The challenge

The client's challenges

01

No grid and no dieselthe battery and solar are each village's only source of power

02

Something has to create the village's voltage and frequency from nothing and hold them steady as load changes

03

After a protective shutdown there is nothing outside to restart the system from

04

Several cloudy days in a row can drain the battery, so load has to be reduced in a planned order

05

Remote sites in the Melghat area with weak 2G connectivity: control cannot depend on the internet

The Ingro solution

What we delivered

What Ingro put in place, step by step.

  1. 1

    Grid-forming control

    the EMS directs the PCS to set the village's voltage and frequency itself and holds them steady as homes switch loads on and off

  2. 2

    Black start

    after a shutdown, the micro-grid comes back from standstill on its own, establishes a stable supply and only then reconnects loads

  3. 3

    SoC-band load shedding

    five battery bands from Full to Critical decide what runs; as charge falls, the EMS sheds non-essential feeders and community loads, never individual homes

  4. 4

    Solar curtailment

    when the battery is full and the village needs less than the panels make, the EMS turns solar output down

  5. 5

    Automatic restoration

    when solar returns, loads reconnect in priority order with nobody needed on site

  6. 6

    Fully local control

    every decision is made on site; data is logged locally and sent to the cloud for monitoring when the 2G link allows

Results & impact

Key outcomes

Villages
Makhala, Bichukheda, Boratyakheda and Raipur
Households
820 homes on solar and battery
Sources
Solar and battery only: no grid, no diesel
Control
Fully local; cloud for monitoring only
Status
Underway
Technology

What it runs on

  • Ingro EMS controller (one per village)
  • Ingro EMS software: grid-forming control, black start, SoC-band load shedding
  • Integration with the PCS and BMS
  • On-site data logging, cloud monitoring over 2G

Got a Similar Project?

Tell us about your site and we will show how the approach used on Off-Grid Solar Micro-grids would apply to it.

What are you looking for?

An engineer replies within one business day. Bills, drawings or data files can go in reply to that email, or to contact@ingroenergy.com. Privacy policy