1.3 MW (1250 kW) BESS containers in India
2 products side by side, plus 1 product family that includes this size; 3 companies in all. All 32 products in BESS containers · Listed A–Z, not ranked · Reviewed November 2026
1250 kW is the power of a 4-hour container: about 5 MWh released over four hours, the duration that Indian tenders are moving towards for evening peak supply. A 5 MW / 20 MWh project, for instance, is usually four of these. Energy per container still varies from about 2.5 to 5 MWh among the products printing this rating, so the hours of storage differ with it.
1250 kW compared
A–Z by company, not ranked · NA: not published by the maker
Grouped within ±3% of 1250 kW, so each product shows the figure its own sheet prints (printed figures grouped in: 1260 kW, Sungrow PowerTitan 2.0).
| Field | REPLUS EngitechRE5K5.01 MWh Liquid-Cooled BESS1250 kW version; the sheet prints 1250–2500 kW. | SungrowPowerTitan 2.0Liquid Cooled Energy Storage System1260 kW version; the sheet prints 1260–2520 kW. |
|---|---|---|
| Rating | ||
| Rated energy | 5010 kWh | 5015 kWh |
| Rated power | 1250 kW | 1260 kW |
| Charge/discharge rate | NA | NA |
| Duration | NA | NA |
| PCS included | NA | Yes |
| Cooling | Liquid | Liquid |
| Battery | ||
| Cell capacity | 314 Ah | 314 Ah |
| Chemistry | NA | LFP |
| DC voltage range | 1040–1500 V | 1123.2–1497.6 V |
| Cycle life | 10000 cycles | NA |
| Electrical | ||
| AC voltage | NA | 690 V |
| AC frequency | NA | 50/60 |
| Round-trip efficiency | NA | NA |
| Efficiency measured | NA | NA |
| Physical | ||
| Size (mm) | NA | 6058 × 2438 × 2896 mm (W × D × H) |
| Weight | NA | NA |
| Enclosure rating | IP55 | IP55 |
| Environment | ||
| Operating temperature | NA | -30–50 °C |
| Max altitude | NA | 4500 m |
| Safety | ||
| Fire suppression | Condensed Aerosol + Water Mist | FK5112 (default); optional sprinkler, explosion vent panel, aerosol |
| Certifications | UL 9540, IEC 62619, NFPA 855, IEEE 693, UN 38.3, UL 1642, UL 1973 | IEC 61000, IEC 62619, IEC 62933, G99, UN 38.3, UN 3536, CE, IEC 62477 |
| Source | ||
| Note | 1250 kW at 0.25C or 2500 kW at 0.5C. | Three versions, all 5015 kWh: 2-hour 2520 kW, 3-hour 1524 kW and 4-hour 1260 kW. Weight 42,500 kg (2-hour and 3-hour) or 42,000 kg (4-hour). The sheet prints no round-trip efficiency or cycle life. |
| Model code | RE5K | ST5015UX-2H / ST5015UX-3H / ST5015UX-4H |
| Datasheet | Spec page of REPLUS Engitech RE5K (opens the maker's site) | Datasheet (PDF) of Sungrow PowerTitan 2.0 (opens the maker's site) |
| CheckedFigures compared with the maker's sheet | November 2026 | November 2026 |
| Details | Details of REPLUS Engitech RE5K | Details of Sungrow PowerTitan 2.0 |
Values as each maker prints them on its own datasheet or spec page, linked in the Datasheet row at the foot of the table; Checked is the date we compared these figures with the maker's sheet. Power and energy are rated figures. Where a sheet prints a power range for one unit, its column shows the version at this size and says so under the name; a sheet printing a range of this page's own figure (several units) is listed under the table, not in it. Nothing here is tested by Ingro Energy, and the order is alphabetical by company.
Product families that include 1250 kW
Each sheet prints a range that reaches 1250 kW rather than one unit at this size, so its figures aren't in the table above. Open the product for everything it prints.
- Cygni Energy Flex Stack · Rated energy: 2500–5000 kWh · Rated power: 1250–2500 kWSpec page of Cygni Energy Flex Stack (opens the maker's site)
What differs between them
Counted from the 2 products above, as printed.
- Rated energy: 5010 to 5015 kWh as printed
- Rated power: 1250 to 1260 kW as printed
- PCS included: 1 of 2; 1 not published
- Cooling: Liquid on all 2
- Cell capacity: 314 Ah on all 2
- Chemistry: LFP; 1 of 2 publishes it
- DC voltage range: 1040 to 1500 V as printed (ranges included)
- AC voltage: 690 V; 1 of 2 publishes it
- AC frequency: 50/60; 1 of 2 publishes it
- Cycle life: 10000 cycles; 1 of 2 publishes it
- Size (mm): 6058 × 2438 × 2896 mm (W × D × H); 1 of 2 publishes it
- Enclosure rating: IP55 on all 2
- Operating temperature: -30 to 50 °C as printed (ranges included); 1 not published
- Max altitude: 4500 m; 1 of 2 publishes it
- Fire suppression: 2 of 2 publish it; values in the table
- Certifications: 2 of 2 publish a list; IEC 62619 on 2, UN 38.3 on 2
Nearby power values
A page needs 3+ products from 3+ companies; values without one are in the full list by power.
- 1000 kW1 product
- 1200 kW1 product
- 1600 kW1 product
- 1725 kW1 product
These products by energy
- 5015 kWh (5 MWh)14 products
Questions about 1.3 MW (1250 kW) BESS containers
- Which companies make 1.3 MW (1250 kW) BESS containers in India?
- 3 companies list 3 products at this size: REPLUS Engitech (RE5K); Sungrow (PowerTitan 2.0); Cygni Energy (Flex Stack). They are listed A–Z by company, not ranked. One is a product family whose sheet prints a range reaching this size (Cygni Energy Flex Stack), listed under the table rather than in it.
- How do these 1.3 MW (1250 kW) BESS containers differ?
- Rated energy: 5010 to 5015 kWh as printed. Rated power: 1250 to 1260 kW as printed. PCS included: 1 of 2; 1 not published. Cooling: Liquid on all 2. Counted from the 2 products as each maker prints them.
- Where do these figures come from?
- From each maker's own datasheet or spec page, checked November 2026. Products printed within ±3% of 1250 kW are grouped on this page, each showing its own printed figure. Nothing here is tested by Ingro Energy, and Ingro Energy is not affiliated with the companies listed.
Is your company on this list? Add it, update your details or raise a concern →
