BESS EMS for Every SizeFrom a 10 kWh home battery to a grid-scale plant.

Ingro EMS runs every common battery size in India with the same controller and console. Pick your size to see what the EMS does at that scale.

An Ingro EMS controller cabinet beside an open battery container and a PCS of any make, with an engineer commissioning the EMS from a tablet and the Ingro console showing the connected devices.
The short answer

Ingro EMS supports every battery size: home batteries of about 10 kWh, commercial cabinets of 100 kWh to 261 kWh, rows of cabinets up to a few megawatt-hours, 5 MWh containers, and grid-scale plants of 10 MW and above. The controller and software are the same; only the enclosure, the wiring and the package change.

Ingro does not make the battery. The cabinet or container can be any maker's, with any BMS and PCS; Ingro EMS is the controller and software that decides when it charges, discharges or holds.

Want an engineer to call you?

Leave your details. An Ingro engineer gets back to you within one business day, no obligation.

Or tell us about your site ↓
Pick your size

Ingro EMS by Battery Size

Each page covers what the battery usually is, where it is used, what Ingro EMS does at that size, and the proof.

Battery sizeUsuallyIngro EMSPage
5 kW / 10 kWhHome inverter with a wall or floor batteryEMS-HSee
50 kW / 100 kWhOutdoor all-in-one battery cabinetEMS-CI, EMS-EVSee
100 kW / 215 kWhOutdoor liquid- or air-cooled battery cabinetEMS-CI, EMS-CPSee
125 kW / 261 kWhOutdoor liquid-cooled battery cabinetEMS-CI, EMS-CP, EMS-EVSee
500 kW / 1 MWhA row of four cabinets, or a small containerEMS-CI, EMS-CPSee
1 MW / 2 MWhEight cabinets, or a container with a 1 MW PCSEMS-CI, EMS-EVSee
2.5 MW / 5 MWh20 ft container, about 5 MWhEMS-CI, EMS-RE, EMS-GSSee
5 MW / 10 MWhTwo 5 MWh containers with PCS and MV skidsEMS-RE, EMS-CISee
10 MW+ / 10 MWh+A container yard at a substationEMS-GS, EMS-RESee

A different size? Send it to us — the same EMS runs it.

One controller

From a Home Inverter to a Container Plant

The same Ingro EMS and the same console, whatever the battery.

ingro123456Ingro EMS
  1. 1A home inverter with a batteryEMS-H runs inside the inverter: typically up to about 10 kW, and not limited to that.
  2. 2One battery cabinetA factory, office or charging hub's first battery, indoors or outside, with its PCS beside it.
  3. 3A row of cabinets, run as one batteryInvertis University: four cabinets, 500 kW / 1.04 MWh, one lead source and three followers.
  4. 4A containerised battery20 ft or 40 ft, with the racks, BMS and cooling inside and the PCS alongside.
  5. 5A container plantTata Power-DDL, Rohini: 10 MW / 10 MWh, 124 PCS units under one Ingro EMS.
  6. 6Ingro EMSThe same controller and software for all of them. Only the enclosure and the wiring change.

Cells, racks and BMS from any maker, LFP, NMC or sodium-ion; PCS from string inverters to central units. The controller's own enclosure follows the site: wall cabinet, floor cabinet, control-room rack or a redundant pair.

Send Us Your Battery, Any Size

The battery size and make, the PCS and what it must do. An engineer replies within one business day with the EMS scope and the package that fits.

What are you looking for?

An engineer replies within one business day. Bills, drawings or data files can go in reply to that email, or to contact@ingroenergy.com. Privacy policy