Listed A–Z, not ranked · Reviewed November 2026
600/625 kVA, 480/500 kWe Prime · DG sets by Cummins India
Specifications
As printed in the datasheet, checked November 2026 (the date we compared these figures with the maker's sheet). NA means not published.
Output
- Rating
- 600–625 kVA
- Power output
- 480–500 kWe
- Printed ratings
- 600, 625 kVA
- Rating basis
- Prime
- Output voltage
- 415
- Frequency
- 50 Hz
- Power factor
- 0.8 (lagging)
- Phase
- 3-phase
Build
- Fuel
- Diesel
- Engine
- Cummins KTAA19-G12 and KTAA19-G13
- Alternator
- Stamford HCI544E
- Enclosure
- Acoustic
- Dimensions (L × W × H)
- 6500 × 2010 × 2800 mm (axes not stated)
- Fuel tank capacity
- 832
- Weight
- about 9029 kg
Certification
- CPCB IV+
- NA
- Certifications and standards
- IS/IEC 60034-1, ISO 8528, ISO 3046, IS 1460, ISO 9001, IS 13018
Performance
- Governing class
- ISO 8528-5 G2
- Fuel consumption
- 98.38 to 102.28 L/h at 75% load
- Noise level
- 75 dBA at 1 m, 75% load, free field
Controls
- Controller
- Cummins PowerCommand 3.3
Support
- Warranty
- 5 Yrs engine critical parts warranty
- Model code:
- C600D5P, C625D5P
- Checked:
- November 2026, against the datasheet
Full datasheet
Every row the maker prints, copied as written, read 2026-11-15.
Overview
- Product
- Diesel Generator Set K19 Series
- Rating
- 600/625 kVA, 480/500 kWe Prime
- Badges and markings
- 5 YRS ENGINE CRITICAL PARTS WARRANTYCPCB II COMPLIANT · ENVIRONMENT FRIENDLY
- Sheet reference
- PSBU/026/K19-600-625kVA/Revision-5/ (02-2023)
Ratings
- Model
- C600D5P: C600D5P; C625D5P: C625D5P
- Duty
- Prime
- Power rating (kVA / kWe)
- C600D5P: 600/480; C625D5P: 625/500
- Prime power definition
- Applicable for supplying power to varying electrical load for unlimited hours. Prime Power (PRP) is in accordance with ISO 8528.
- Phases
- 3
- Output voltage and frequency (V, Hz)
- 415 V, 50 Hz
- Power factor
- 0.8 (lagging)
- Current (A)
- C600D5P: 835; C625D5P: 870
- Speed (RPM)
- 1500
Engine
- Engine make
- Cummins®
- Engine model
- C600D5P: KTAA19-G12; C625D5P: KTAA19-G13
- MoEF certified power (bhp)
- C600D5P: 713; C625D5P: 739
- Power required for rated kVA (bhp)
- C600D5P: 708; C625D5P: 734
- Cooling
- Liquid Cooled (EG Compleat 50:50)
- Aspiration
- Turbocharged, Charge air Cooled
- Cylinders
- 6, In-line
- Bore × stroke (mm)
- 159 x 159
- Displacement (litre)
- 19
- Compression ratio
- 14.3:1
- Mean piston speed (m/s)
- 7.95
- Governor / performance class
- ISO 8528-5 G2
- Starting system
- 24 V DC Electrical
- Lube oil specification
- 15W40 API, CI4+
- Lube oil sump capacity, high–low (litre)
- 38-32
- Lubrication system capacity (litre)
- 50
- Coolant capacity (litre)
- 90
- Combustion air intake at 100% load, ±5% (cfm)
- C600D5P: 1458; C625D5P: 1496
- Exhaust temperature (°C)
- 527
- Exhaust pipe size (inch)
- 10
- Engine wet weight, engine + radiator (kg)
- 2500
- Engine L × W × H (mm)
- 1830 x 964 x 1514
- Engine features
- Cummins® K19 series, 6 cylinder, In-line, 4 stroke, radiator cooled engineHighly stable and reliable design with square engineWell designed air handling system with: Dry type, replaceable paper element air cleaner with restriction indicatorWell designed air handling system with: Optimised turbocharger for increased altitude capabilitiesWell designed air handling system with: Air to air aftercoolingBest in class fuel economy with: PT fuel system with Electronic Step Timing Control (ESTC) injectors which smoothly stabilise engine speed under load with Electronic governingBest in class fuel economy with: Dual fuel filter system: Pre filter including water separator and Water In Fuel (WIF) sensor and main filterStandard integral set-mounted radiator system, designed and tested for 50°C ambient temperatureVenturi combo Spin on oil filterPlate type lube oil coolerFirst fill of lube oil and CoolantElectrical starter motor with soft start engagement featureBattery charging alternator2x12 V DC Batteries
Fuel
- Fuel
- High Speed Diesel
- Fuel consumption at 75% load (litre/hr)
- C600D5P: 98.38; C625D5P: 102.28
- Fuel consumption at 100% load (litre/hr)
- C600D5P: 125.5; C625D5P: 129.74
- Standard fuel tank capacity (litre)
- 832
Alternator
- Alternator make
- Stamford (CGT)
- Alternator frame
- HCI544E
- Alternator enclosure
- IP 23
- Voltage regulation
- ±1%
- Insulation class
- H Class
- Winding pitch
- 2/3
- Stator winding
- Double layer lap
- Rotor
- Dynamically Balanced
- Total harmonic distortion
- No load < 1.5 %, Non distorting balanced linear load < 5 %
- Maximum unbalanced load across phases
- less than or equal to 25%
- Telephone harmonic factor
- < 2%
- Alternator features
- Stamford HC alternator frame from Cummins Generator TechnologiesBrushless Type, Screen protected, Revolving field, Self excited Alternator conforming to IS/IEC 60034-13 Phase reconnectable winding with 12 terminals brought out for connectionBetter motor starting capabilityBest in class efficiencyCompact design with sealed bearings for longer life and lesser maintenanceImpregnation on all wound components for better mechanical strength
Controls
- Controller description
- The PowerCommand® control system is an integrated microprocessor-based generator set monitoring, metering and control system with LCD display designed to meet the demands of today's engine driven generator sets. temperature, Low coolant level, Oil temperature, Intake manifold temperature, Battery voltage, Engine speed
- Control panel
- Control panel is manufactured with 14/16 gauge CRCA sheet and is powder coated for weather-proof and long lasting finish.PowerCommand® 3.3 ControllerAluminum bus bars with suitable capacity with incoming/ outgoing terminalsIndicating lamps for 'Load ON' and 'Set Running'Instrument fuses duly wired and ferruledAir Circuit Breakers (ACBs) of suitable rating with overload and short circuit protectionsIntuitive operator interface which includes LED backlit LCD display with tactile feel soft-switches & generator set status LED lampsIntegrated digital electronic voltage regulator with configurable torque matching.Digital Electronic Governing with temperature compensation and Smart Starting.SAE J1939 Interface to Full Authority Electronic (FAE) engines.Remote Start-StopEngine Metering: Oil pressure, High/ Low coolant
- Alternator metering
- L-L Voltage and L-N Voltage, Current (1 and 3 phase), kW, kVAR, Power factor, kVA (three phase and total), and Frequency.
- Utility / AC bus metering
- L-L Voltage and L-N Voltage, Current (1 and 3 phase), kW, kVAR, Power factor, kVA (three phase and total), and Frequency.
- Engine protection
- Low lube oil pressure, High / Low coolant temperature, Over speed, Battery Over / Under/ Weak Volts, Fail to crank / start, Cranking lockout, Low fuel level, Sensor failure.
- Alternator protection
- AmpSentry protective relays for short circuit shutdown, Over / Under voltage, Over / Under frequency, Over current, Overload, Reverse power, Reverse VAr, Phase rotation and Loss of AC sensing.
- Utility / AC bus protection
- Over / Under voltage, Under frequency and Phase rotation
- Data logging
- Genset model data, Engine hours, Control hours, Engine starts, Load profile, kWh and upto 32 recent fault codes
- Control functions
- Start-stop with configurable time delay, Real time clock for fault and event time stamping, Exerciser clock and time of day start/ stop, Configurable glow plug control, Configurable cycle cranking, Load shed / dump as per configurable priority
- Paralleling
- Digital frequency synchronization and voltage matching, Isochronous kW and kVAr load sharing controls, Droop kW and kVAr control, Sync check, Extended paralleling (Peak Shave / Base Load), Digital power transfer control (AMF), Load govern control, Load demand control
- Controller certifications
- meets the requirement of relevant UL, NFPA, ISO, IEC, Mil Std., CE and CSA standards
- Controller features
- Paralleling protections12 and 24 Volt DC OperationSleep ModeProgrammable I/Os (4 inputs and 4 outputs), expandablewith AUX101/102 modulesSelf-Configuring PCCNet networkModbus Interface (RS485 RTU)InPower Compatible (PC based service tool)
- Remote monitoring / telematics
- Fault Code Alerts on Email & SMSAdvisory ServicesFuel Level Monitoring on Email & SMSMultiple Gensets Central MonitoringAutomatic Reports Generation
Enclosure & acoustics
- Enclosure
- SilentPower
- Acoustic enclosure
- Specially designed to meet stringent MoEF/ CPCB norms of 75 dBA @ 1mtr at 75% load under free field conditionsThe acoustic enclosure is made of CRCA sheets in Munsell green shade and a structural/ sheet metal base frame painted in blackHigh quality noise absorbant and fire-retardant grade acoustic insulation material (Rockwool) complying to IS 8183Base lifting for easy handling at customer siteDesigned to have optimum serviceabilityAir inlet louvers specially designed to operate at rated loadMade on special purpose CNC machines for consistency in quality and workmanship11 tank pretreatment process and UV resistant powder coating of all parts to withstand extreme environmentUse of special hardware for longer lifeFlush styling - no projectionsFluid drains for lube oil and fuelFuel filling arrangement inside the enclosure
- Silencer
- Hospital grade silencer suitably optimised to meet stringent noise emission standards laid down by MoEF/CPCB
Physical
- Length (mm)
- 6500
- Width (mm)
- 2010
- Height (mm)
- 2800
- Wet weight (kg)
- 9029
- Mounting arrangement
- Engine and alternator are mounted on a common MS fabricated base frame with AVM pads.Base frame with integral fuel tank is provided with drain plug, air vent, inlet and outlet connection, level indicator and provision for cleaning
Options
- Optional: engine
- Coolant heater, Heat exchanger, No cool, Remote radiator
- Optional: alternator
- PMG
- Optional: control panel
- Microprocessor / relay based AMF control panel
- Optional: other
- Trolley mounted mobile sets
Certifications
- Conformance standards
- IS/IEC 60034-1, IS 1460, ISO 8528, ISO 3046, ISO 9001, IS 13018
Features
- Highlights
- The Cummins® K19 series heavy-duty engine and world class Stamford alternator powered diesel generator setProven technology with mechanical simplicity of Cummins® PT fuel systemAdvanced in-cylinder technology to meet latest emission norms without any after-treatment deviceSmart aesthetic and superior finishCompact in size with optimum power to weight ratioHighly reliable and durable productAll elements are designed to work together to maximize efficiency even at part loads, offering the advantage of lowest operating costs500Hours or 1 year service interval, whichever is earlierIndustry acknowledged best-in-class comprehensive warranty on the entire package including rubber componentsClass defining technology engine is designed to meet stringent exhaust emission tests as per revised MoEF norms, thus offering environment friendly powerThe Cummins® diesel generator sets are available with the lowest noise levels in its rangeAll the major components - the engine, alternator, control system and canopy are designed, manufactured and tested by Cummins IndiaBest and largest customer support network in India, capable of providing round-the-clock service and spares supportAll these things put together, Cummins® offers you the SINGLE SOURCE POWER ASSURANCE
Notes
- Sheet footnotes
- Fuel consumption data is based on diesel having specific gravity of 0.85 and conforming to IS:1460. Fuel consumption tolerance is +5%With the condition that none of the phases exceeds its rated currentApproximate Weight
More DG sets from Cummins India
- K19 Series500 kVA, 400 kWe Prime
- L8.9 Series250 kVA, 200 kWe Prime
- QSB5.9 Series140 - 160 kVA Prime
- QSB6.7 Series180 - 225 kVA, 144 - 180 kWe Prime
- QSK60 Series2000-2250 kVA Prime
- QSM15 Series380 - 500 kVA, 304 - 400 kWe Prime
- X2.5 Series7.5 - 20 kVA, 6 - 16 kWe Prime
- X3.6 Series50 - 58.5 kVA, 40 - 47 kWe Prime
Cummins India K19 Series, in short
The Cummins India K19 Series is a DG set rated 600 kVA, with rating basis Prime and fuel Diesel. 1 other DG set at 600 kVA is listed, from 1 maker. Cummins India has 8 other DG sets on this site.
Same size from other makers: Sudhir Power CS D5P series
Questions about the Cummins India K19 Series
- What are the main specifications of the Cummins India K19 Series?
- Rated 600 kVA; Rating basis Prime; Fuel Diesel. As printed on Cummins India's datasheet (checked November 2026); the full list is on this page.
- Where can I find the Cummins India K19 Series datasheet?
- Cummins India publishes it on its own website, and this page links to it. The figures here were last checked against it in November 2026.
- What are the alternatives to the Cummins India K19 Series?
- Other 600 kVA DG sets sold in India include Sudhir Power CS D5P series.
- Who makes the Cummins India K19 Series?
- Cummins India, with its head office in Pune. It has 9 DG sets on this site, including this one.
Spot a wrong or outdated figure? Report a correction and we'll check it against the maker's current sheet.
Values as Cummins India prints them in the linked datasheet; NA means it doesn't publish that figure. Nothing here is tested by Ingro Energy, and Ingro Energy is not affiliated with Cummins India. Product and company names are trademarks of their owners, used only to identify the product.
