Listed A–Z, not ranked · Reviewed November 2026
2000-2250 kVA Prime · DG sets by Cummins India
Specifications
As printed in the datasheet, checked November 2026 (the date we compared these figures with the maker's sheet). NA means not published.
Output
- Rating
- 2000–2250 kVA
- Power output
- NA
- Printed ratings
- 2000, 2250 kVA
- Rating basis
- Prime
- Output voltage
- 415
- Frequency
- 50 Hz
- Power factor
- 0.8 (lag)
- Phase
- 3-phase
Build
- Fuel
- Diesel
- Engine
- Cummins QSK60-G32 and QSK60-G31
- Alternator
- Stamford-LT S7L1D-G4 and S7L1D-H4
- Enclosure
- NA
- Dimensions (L × W × H)
- 6175 × 2494 × 3115 mm (axes not stated)
- Fuel tank capacity
- 990
- Weight
- 17333–18976 kg
Certification
- CPCB IV+
- NA
- Certifications and standards
- ISO 8528, IS 1460
Performance
- Governing class
- A1
- Fuel consumption
- 291 to 331 L/h at 75% load
- Noise level
- NA
Controls
- Controller
- Cummins PowerCommand® PC 3.3 with MLD
Support
- Warranty
- 2 years / 5000 hrs for the entire generating set; 5 years or 5000 hours (including above 2 years) on 5 critical engine components (5C), India source product only
- Model code:
- C2000D5PC, C2250D5PC
- Checked:
- November 2026, against the datasheet
Full datasheet
Every row the maker prints, copied as written, read 2026-11-15.
Overview
- Product
- Diesel Generator Set
- Series
- QSK60 Series
- Rating
- 2000-2250 kVA Prime
- Badges and markings
- Leading the Change: 5 YRS ENGINE CRITICAL PARTS WARRANTY
- Sheet reference
- PSBU/023/QSK 60-2000-2250 kVA/CAQM/REVISION-1 (02/2025)
Ratings
- Model
- C2000 D5 PC; C2250 D5 PC
- Prime power rating (kVA)
- C2000D5PC: 2000; C2250D5PC: 2250
- Prime power definition
- Applicable for supplying power to varying electrical load for unlimited hours. Prime Power (PRP) is in accordance with ISO 8528. Ten percent overload capability is available in accordance with ISO 3046 and IS 13018.
- Phases
- 3 phase
- Output voltage and frequency (V, Hz)
- 415V/50Hz
- Power factor
- 0.8 (lag)
Engine
- Engine make
- Cummins
- Engine model
- C2000D5PC: QSK60-G32; C2250D5PC: QSK60-G31
- Engine output (prime)
- C2000D5PC: 2319 bhp (1730 kWm); C2250D5PC: 2603 bhp (1942 kWm)
- Aspiration
- Turbocharged - LTA Aftercooled
- Cylinders
- 16
- Bore × stroke (mm)
- 159 mm x 190 mm
- Displacement (litre)
- 60.2 ltrs
- Compression ratio
- 14.5:1
- Mean piston speed (m/s)
- 9.5 m/s
- Governor / performance class
- Electronic / A1
- Lubrication system capacity (litre)
- 261 ltrs
- Coolant capacity (litre)
- 621 ltrs
- Combustion air intake at 100% load, ±5%
- C2000D5PC: 143 m³/min; C2250D5PC: 153 m³/min
- Exhaust temperature (°C)
- C2000D5PC: 456 °C; C2250D5PC: 470 °C
- Engine wet weight, engine + radiator (kg)
- 9904 kg
- Engine L × W × H (mm)
- 2780 x 1591 x 1960 mm
- Engine features
- Cummins® 'QSK60 series' full authority electronic injection, water cooled engine, 16 cylinder, 4 stroke, rated at 1500 RPM.Cummins Full Authority electronicsCummins HPI injectorsCummins turbocharger, pulse tuned exhaust manifold, stainless steel exhaust flexible connections (4 Turbos)Radiator or heat exchanger, coolant inhibitorPlate type lube oil coolerOutboard aftercoolersFull flow paper element filters - fuel, lube oil and by-passDry type replaceable paper element air cleaner with restriction indicatorFlywheel housing & flywheel to suit single bearing alternatorStarting motor – ElectricBattery charging alternatorCummins PowerCommand® microprocessor based genset controllerFirst fill lube oil
Fuel
- Fuel consumption at 75% load (litre/hr)
- C2000D5PC: 291 ltr/hr; C2250D5PC: 331 ltr/hr
- Fuel consumption at 100% load (litre/hr)
- C2000D5PC: 390 ltr/hr; C2250D5PC: 441 ltr/hr
- Fuel consumption basis
- Fuel consumption data is based on diesel having specific gravity of 0.85 and conforming to IS:1460+5%
- Standard fuel tank capacity, external (litre)
- 990
Alternator
- Alternator make
- Stamford-LT
- Alternator frame
- C2000D5PC: S7L1D-G4; C2250D5PC: S7L1D-H4
- Alternator enclosure
- IP 23
- Voltage regulation
- ± 0.5%
- Insulation class
- Class H
- Winding pitch
- 2 / 3 Pitch
- Stator winding
- C2000D5PC: Double Layer Concentric; C2250D5PC: Double layer lap, form wound
- Total harmonic distortion
- <2% (50Hz)
- Alternator features
- Stamford brushless alternatorSalient pole revolving fieldSingle / bearingRe-greasable deep groove Single bearingExcitation - PMG basedSpace heaters, RTD/BTD - (without scanner).
Controls
- Controller
- PowerCommand® PC 3.3 with MLD
- Control panel
- The PowerCommand® control system is an integrated microprocessor based generator set control system providing voltage regulation, engine protection, alternator protection, operator interface and isochronous governing.
- Operator interface
- The operator panel, in addition to the alternator, displays the Utility/ AC Bus data.320 x 240 pixels graphic LED backlight LCD with bar graph for displaying electrical parametersAuto, manual, start, stop, fault reset and lamp test/panel lamp switchesAlpha-numeric display with pushbuttonsLED lamps indicating genset running, remote start, not in auto, common shutdown, common warning, manual run mode, auto mode and stop
- Engine metering
- DC voltageEngine speedLube oil pressureCoolant temperature/ low levelComprehensive FAE data (where applicable)
- Alternator metering
- Line-to-neutral and line-to-line AC volts3-phase AC currentFrequencykW, kvar, power factor kVA (three phase and total)
- Engine protection
- Battery voltage monitoring, protection and testingOver speed shutdownLow oil pressure warning and shutdownHigh coolant temperature warning and shutdownLow coolant level warning or shutdownLow coolant temperature warningFail to start (over crank) shutdownFail to crank shutdownCranking lockoutSensor failure indicationLow fuel level warning or shutdown
- Alternator protection
- AmpSentry™ protective relayOver current and short circuit shutdownOver current warningSingle and three phase fault regulationOver and under voltage shutdownOver and under frequency shutdownOverload warning with alarm contactReverse power and reverse var shutdownField overload
- Data logging
- Genset model dataStart attempts, starts, running hours, kW hoursLoad profile (operating hours at % load in 5% increments)Fault historyData logging and fault simulation (requires InPower)
- Control functions
- Integrated digital electronic isochronous governorTemperature dynamic governingIntegrated digital electronic voltage regulator3-phase, 4-wire line-to-line sensingConfigurable torque matching
- Paralleling
- Digital frequency synchronization and voltage matchingIsochronous kW and kvar load sharing controlsDroop kW and kvar controlSync checkExtended paralleling (Peak Shave/Base Load)Digital power transfer control (AMF) provides load transfer operation in open or closed transition or soft (ramping) transfer mode
- MLD features
- Load dependent start/stopRun hour equalizationBuilt-in LogicSingle point MLD settingSystem monitoringMaster-lessSingle point remote startPredictive Load inputDedicated screens
- Communications interface
- Control comes standard with PCCNet and Modbus interface.
- Multi-language support
- Yes
- Set-up without PC / laptop
- Yes
- Controller features
- Includes integral AmpSentry™ protection, which provides a full range of alternator protection function which are matched to the alternator provided.Control function provides battery monitoring, testing and a smart starting control system.Three phase sensing, FET based full wave rectified voltage regulation and a PWM output for stable operation with all load types.InPower™ PC-based service tool available for detailed diagnostics, setup, data logging and fault simulation.For reliable operations in harsh environment.
Physical
- Length (mm)
- C2000D5PC: 5950; C2250D5PC: 6175
- Width (mm)
- C2000D5PC: 2594; C2250D5PC: 2494
- Height (mm)
- C2000D5PC: 3304; C2250D5PC: 3115
- Wet weight (kg)
- C2000D5PC: 17333; C2250D5PC: 18976
- Standard accessories
- Silencer suitably optimized to reduce noiseSturdy base rail990 ltrs. free standing fuel tankBatteries with connecting leads and terminals
Options
- Optional: engine
- Heat exchanger, No cool
- Optional: control panel
- PC3.3Bargraph For PC3.3 Panel with kW, Power factor, Frequency,Current and VoltageRemote HMI, AMF control panel, Battery charger, Remote/Auto start panel, Auto/Manual synchronizing panel, Audio/Visual annunciation for faults
Features
- Highlights
- Cummins® 'QSK60 series' (Quantum leap in product technology) diesel engine with strong regrindable crankshaft, high strength connecting rod, high pressure injection full authority electronic fuel system, 2 pump 2 loop coolant system. 'QSK60 series' generating sets are more reliable and durable. Engines have clocked millions of hours operating in some of the world's most demanding conditions. Current engines are regularly upgraded with new technologies for better performance and economy. The ultimate proof of superior performance and reliability is the fact that Cummins® manufactures these engines in India.Cummins® 'QSK60 series' diesel engine generating sets are a truly cost effective solution to long term power need backed by industry best, 2 years / 5000 hrs warranty, for the entire generating set. With superior experience in technology, design capability, commitment, reliability and quality we offer an unmatched 5 years or 5000 hours (including above 2 years) warranty coverage on 5 critical components (5C) of the engine – Cylinder Head, Camshaft, Crankshaft, Cylinder Block, Connecting Rod against manufacturing defect (5C warranty is offered only for India source product.Special features of Cummins® 'QSK60 series' engines like full authority electronic injection, low temperature aftercooler, optimised turbocharging and precision injection timing make these engines the ultimate in exceptional fuel efficiency all across the operating range.Design, manufacture and testing of engine, alternator and other accessories is done by Cummins Group of companies for optimum performance and is backed by a countrywide product the entire package.
Notes
- Sheet footnotes
- * Refer to Factory for 3.3/*6.6 KV & Alternator frame*
More DG sets from Cummins India
- K19 Series500 kVA, 400 kWe Prime
- K19 Series600/625 kVA, 480/500 kWe Prime
- L8.9 Series250 kVA, 200 kWe Prime
- QSB5.9 Series140 - 160 kVA Prime
- QSB6.7 Series180 - 225 kVA, 144 - 180 kWe Prime
- QSM15 Series380 - 500 kVA, 304 - 400 kWe Prime
- X2.5 Series7.5 - 20 kVA, 6 - 16 kWe Prime
- X3.6 Series50 - 58.5 kVA, 40 - 47 kWe Prime
Cummins India QSK60 Series, in short
The Cummins India QSK60 Series is a DG set rated 2000 kVA, with rating basis Prime and fuel Diesel. 2 other DG sets at 2000 kVA are listed, from 2 makers. Cummins India has 8 other DG sets on this site.
Same size from other makers: Ojus Power and Technologies 2000 kVA, Sudhir Power CS D5P series · All 2000 kVA side by side
Questions about the Cummins India QSK60 Series
- What are the main specifications of the Cummins India QSK60 Series?
- Rated 2000 kVA; Rating basis Prime; Fuel Diesel. As printed on Cummins India's datasheet (checked November 2026); the full list is on this page.
- Where can I find the Cummins India QSK60 Series datasheet?
- Cummins India publishes it on its own website, and this page links to it. The figures here were last checked against it in November 2026.
- What are the alternatives to the Cummins India QSK60 Series?
- Other 2000 kVA DG sets sold in India include Ojus Power and Technologies 2000 kVA and Sudhir Power CS D5P series. All of them are compared side by side on the 2000 kVA page.
- Who makes the Cummins India QSK60 Series?
- Cummins India, with its head office in Pune. It has 9 DG sets on this site, including this one.
Spot a wrong or outdated figure? Report a correction and we'll check it against the maker's current sheet.
Values as Cummins India prints them in the linked datasheet; NA means it doesn't publish that figure. Nothing here is tested by Ingro Energy, and Ingro Energy is not affiliated with Cummins India. Product and company names are trademarks of their owners, used only to identify the product.
