KEI Industries PV Solar Cables
- Directory
- Equipment
- Solar and power cables
- PV Solar Cables
Listed A–Z, not ranked · Reviewed November 2026
Solar and power cables by KEI Industries
Specifications
As printed in the spec page, checked November 2026 (the date we compared these figures with the maker's sheet). NA means not published.
General
- Type
- Solar DC
Construction
- Conductor
- Tinned copper
- Cross-section
- 1.5–240 mm²
- Printed cross-sections
- 1.5, 2.5, 4, 6, 10, 16, 25, 35, 50, 70, 95, 120, 150, 185, 240 mm²
- Cores
- Single core
- Insulation
- Crosslinked halogen free & flame retardant
- Sheath
- Crosslinked halogen free & flame retardant UV and ozone resistant
- Armoured
- NA
- Conductor class
- Class 5
- Min bending radius
- 6 x OD (fixed), 15 x OD (occasional flexing)
Electrical
- Voltage rating
- 1.5 kV DC
- Fire performance
- Flame retardant; low smoke emission; halogen-free
- Operating temperature
- -40–90 °C
- UV resistant
- Yes
- Max permissible voltage
- 1.8 kV DC
- Test voltage
- 6.5 kV AC; 15 kV DC
- Max conductor temperature
- 120 °C
- Ozone resistant
- Yes
- Chemical resistance
- Mineral oil, acid and alkaline; very good resistance to oil and chemicals
- Expected service life
- 30 years
Certification
- Standards
- 2 Pfg 1169/08.2007, EN 50618
- Certifications
- NA
More Solar and power cables from KEI Industries
- 1 Core Aluminium PVC Armoured & Unarmoured Power Cables
- 1 Core Aluminium XLPE Armoured & Unarmoured Power Cables
- 1 Core Copper PVC Armoured & Unarmoured Power Cables
- 1 Core Copper XLPE Armoured & Unarmoured Power Cables
- 2 Core Aluminium PVC Armoured & Unarmoured Power Cables
- 2 Core Aluminium XLPE Armoured & Unarmoured Power Cables
- 2 Core Copper PVC Armoured & Unarmoured Power Cables
- 2 Core Copper XLPE Armoured & Unarmoured Power Cables
- 3 Core Aluminium PVC Armoured & Unarmoured Power Cables
- 3 Core Aluminium XLPE Armoured & Unarmoured Power Cables
- 3 Core Copper PVC Armoured & Unarmoured Power Cables
- 3 Core Copper XLPE Armoured & Unarmoured Power Cables
KEI Industries PV Solar Cables, in short
The KEI Industries PV Solar Cables is a solar and power cables rated 1.5 mm², with type Solar DC, conductor Tinned copper and voltage rating 1.5 kV DC. 7 other solar and power cables at 1.5 mm² are listed, from 6 makers. KEI Industries has 27 other solar and power cables on this site.
Same size from other makers: Dynamic Cables Solar DC Cable, Finolex Cables Solar Endura PV Cables, LAPP India ÖLFLEX SOLAR XLR-I5, Rolliflex Cables Solar Cables, RR Kabel Solar Cable – EN 50618, KEI Industries Cables for Photovoltaics (Solar Cables) · All 1.5 mm² side by side
Questions about the KEI Industries PV Solar Cables
- What are the main specifications of the KEI Industries PV Solar Cables?
- Rated 1.5 mm²; Type Solar DC; Conductor Tinned copper; Voltage rating 1.5 kV DC. As printed on KEI Industries' spec page (checked November 2026); the full list is on this page.
- Where can I find the KEI Industries PV Solar Cables spec page?
- KEI Industries publishes it on its own website, and this page links to it. The figures here were last checked against it in November 2026.
- What are the alternatives to the KEI Industries PV Solar Cables?
- Other 1.5 mm² solar and power cables sold in India include Dynamic Cables Solar DC Cable, Finolex Cables Solar Endura PV Cables, LAPP India ÖLFLEX SOLAR XLR-I5 and Rolliflex Cables Solar Cables. All of them are compared side by side on the 1.5 mm² page.
- Who makes the KEI Industries PV Solar Cables?
- KEI Industries, with its head office in New Delhi. It has 28 solar and power cables on this site, including this one.
Spot a wrong or outdated figure? Report a correction and we'll check it against the maker's current sheet.
Values as KEI Industries prints them in the linked spec page; NA means it doesn't publish that figure. Nothing here is tested by Ingro Energy, and Ingro Energy is not affiliated with KEI Industries. Product and company names are trademarks of their owners, used only to identify the product.
