EMS for 2.5 MW / 5 MWh Battery ContainersAny maker's container. Two makers, one plant.

The 20 ft, 5 MWh container is the building block of large battery plants in India. Ingro EMS runs one container, or several from different makers, as one plant.

Large C&I and plants

2.5 MW / 5 MWh

Power
2.5 MW
Energy
5 MWh
At full power
about 2 hours
Format
20 ft container, about 5 MWh
Ingro EMS-CIIngro EMS-REIngro EMS-GSAny battery, BMS or PCS
The short answer

For a 2.5 MW / 5 MWh BESS container, Ingro EMS is the plant controller that runs the container and its PCS against the site's demand, tariff, solar or dispatch schedule. It works with any maker's container and BMS, and runs containers from different makers as one plant — as it does at JSW Energy's Pune site, where two 5 MWh containers from two makers sit behind one PCS.

Ingro does not make the battery. The cabinet or container can be any maker's, with any BMS and PCS; Ingro EMS is the controller and software that decides when it charges, discharges or holds.

The battery

What a 2.5 MW / 5 MWh BESS Usually Is

What a battery of this size usually looks like on an Indian site.

  • A 20 ft container with the racks, BMS, liquid cooling and fire suppression inside.
  • Typically 314 Ah LFP cells, about 5 MWh (often listed as 5,015 kWh).
  • A 2.5 MW PCS (or two of 1.25 MW) and an MV transformer skid beside it.

Choosing the battery? 5 MWh container makers in the Ingro directory

Where it works

Where a 2.5 MW / 5 MWh Battery Earns Its Keep

The sites that most often install a 2.5 MW / 5 MWh battery.

Heavy industry

Contract demand, ToD and backup at megawatt scale.

Solar and wind plants

Store curtailed energy and deliver it in the evening peak.

Substations and C&I solar parks

Peak support and shifting for a feeder or a group of consumers.

Want an engineer to call you?

Leave your details. An Ingro engineer gets back to you within one business day, no obligation.

Or tell us about your site ↓
What Ingro EMS does

Ingro EMS on a 2.5 MW / 5 MWh Battery

The battery stores energy and the PCS converts it. The EMS decides what it earns, every control cycle.

Mixed makers

Can a second container come from another maker?

Yes. At JSW Energy, Pune, two 5 MWh containers from two makers run as one 2.5 MW / 10 MWh plant.

Maintenance

Can one container be taken out?

The plant keeps running on the other container while one is serviced.

Plant control

Who sets the power?

The EMS sets the PCS power every control cycle against the meter, tariff, solar or schedule.

Records

What does the owner get?

Availability, energy throughput, battery health and dispatch reports.

Connecting it

Which Ingro EMS Runs This Size

Ingro EMS connects to each container's BMS, the PCS, the MV meters and, where present, the solar plant controller. It speaks Modbus TCP, Modbus RTU over RS485, SunSpec, IEC 61850, DNP3 and OPC-UA, plus dry contacts, digital I/O and aggregator gateways. Ingro EMS is deployed on site (offline), in the cloud, or as a hybrid of the two. In on-site and hybrid deployments, site control continues with no internet connection.

Building batteries of this size? Ingro EMS for integrators, EPCs and pack makers · Every BMS, PCS and protocol

Common questions

EMS for a 2.5 MW / 5 MWh BESS, Answered

4 questions

A plant controller that reads the container's BMS and PCS and runs it against the site's demand, tariff, solar or dispatch schedule. Ingro EMS does this with any maker's container, and runs a 2.5 MW / 10 MWh plant of two 5 MWh containers at JSW Energy, Pune.

Yes. At JSW Energy, Ingro replaced the existing EMS, hardware and software. See Smart Retrofit for batteries already in service.

Yes. Ingro EMS reads each BMS in its own protocol. At JSW Energy the second container came from a different maker and runs with the first as one plant.

Send the battery size and make, the PCS, a year of electricity bills or the load profile, and what the battery must do (peak shaving, backup, solar, DG, dispatch). An engineer replies within one business day with a scope of supply.

Still have a question?

Share details of your site, hardware and tariff or tender, and an engineer will answer it.

Every size

Ingro EMS for Every Battery Size

One controller and one console, from a home battery to a grid-scale plant.

Compare all sizes

Running a 2.5 MW / 5 MWh Battery? Put Ingro EMS on It.

Send the battery and what it must do. An engineer replies within one business day.

You send
  • 1The battery size and make, and the PCS
  • 2A year of bills or the load profile
  • 3What the battery must do: peak, backup, solar, DG or dispatch
We return
  • An EMS scope of supply
  • Which Ingro EMS package fits, and how it connects
  • Or a complete BESS proposal, if you hand over the plant

Get a Proposal for Your 2.5 MW / 5 MWh Battery

Tell us the battery, the PCS and what it must do. An engineer replies within one business day with the EMS scope and the package that fits.

What are you looking for?

An engineer replies within one business day. Bills, drawings or data files can go in reply to that email, or to contact@ingroenergy.com. Privacy policy