For a 100 kW / 215 kWh battery cabinet, Ingro EMS-CI is the energy management system that runs it against your demand limit, ToD tariff, rooftop solar and diesel generator. It runs one cabinet or several in parallel as a single battery, with any maker's cabinet, BMS and PCS, and keeps control on site with no internet needed.
Ingro does not make the battery. The cabinet or container can be any maker's, with any BMS and PCS; Ingro EMS is the controller and software that decides when it charges, discharges or holds.
What a battery of this size usually looks like on an Indian site.
Choosing the battery? 215 kWh cabinet makers in the Ingro directory
The sites that most often install a 100 kW / 215 kWh battery.
Hold the demand limit through motor starts and shift changes; store rooftop solar.
Carry critical loads through the first minutes of an outage and cut DG run hours.
Trim the afternoon cooling peak and move energy out of the peak tariff window.
Leave your details. An Ingro engineer gets back to you within one business day, no obligation.
The battery stores energy and the PCS converts it. The EMS decides what it earns, every control cycle.
The EMS splits power across cabinets by state of charge and health, so one cabinet is not cycled harder than the rest.
Discharge starts when the main meter nears the limit, and stops when demand falls back.
Solar first, battery next, grid after, the DG only when the battery cannot carry the load.
Monthly savings, bill reconciliation, battery health and DG fuel reports come standard.
Ingro EMS connects to each cabinet's BMS and PCS, the main meter, the solar inverters and the DG controller. It speaks Modbus TCP, Modbus RTU over RS485, SunSpec, IEC 61850, DNP3 and OPC-UA, plus dry contacts, digital I/O and aggregator gateways. Ingro EMS is deployed on site (offline), in the cloud, or as a hybrid of the two. In on-site and hybrid deployments, site control continues with no internet connection.
Building batteries of this size? Ingro EMS for integrators, EPCs and pack makers · Every BMS, PCS and protocol
4 questions
Ingro EMS-CI for factories, offices and campuses, or EMS-CP for hospitals and data centres. Both run any maker's 215 kWh cabinet and several cabinets as one battery.
Ingro EMS is deployed on site (offline), in the cloud, or as a hybrid of the two. In on-site and hybrid deployments, site control continues with no internet connection.
Yes. Ingro EMS reads each cabinet's BMS and PCS in its own protocol and controls them as one battery. At JSW Energy's Pune site it runs batteries from two different makers as one plant.
Send the battery size and make, the PCS, a year of electricity bills or the load profile, and what the battery must do (peak shaving, backup, solar, DG, dispatch). An engineer replies within one business day with a scope of supply.
Still have a question?
Share details of your site, hardware and tariff or tender, and an engineer will answer it.
One controller and one console, from a home battery to a grid-scale plant.
Send the battery and what it must do. An engineer replies within one business day.
Tell us the battery, the PCS and what it must do. An engineer replies within one business day with the EMS scope and the package that fits.