EMS for 125 kW / 261 kWh Battery CabinetsThe cabinet every Indian maker now builds. The EMS that runs it.

The 125 kW / 261 kWh liquid-cooled cabinet has become the standard commercial battery in India. If you build it, Ingro EMS goes inside. If you buy it, Ingro EMS runs it — one cabinet or a row.

Commercial & industrial

125 kW / 261 kWh

Power
125 kW
Energy
261 kWh
At full power
about 2 hours
Format
Outdoor liquid-cooled battery cabinet
Ingro EMS-CIIngro EMS-CPIngro EMS-EVAny battery, BMS or PCS
The short answer

For a 125 kW / 261 kWh battery cabinet, Ingro EMS is the energy management system that runs it against the site's demand limit, ToD tariff, solar and diesel generator. Pack makers and integrators building this cabinet can put Ingro EMS inside it; site owners use it to run one cabinet or several as one battery. It works with any BMS and PCS, and runs on site, in the cloud or both.

Ingro does not make the battery. The cabinet or container can be any maker's, with any BMS and PCS; Ingro EMS is the controller and software that decides when it charges, discharges or holds.

The battery

What a 125 kW / 261 kWh BESS Usually Is

What a battery of this size usually looks like on an Indian site.

  • An outdoor liquid-cooled cabinet with the racks, BMS, cooling and fire protection inside, and a 125 kW PCS.
  • Typically 314 Ah LFP cells, about 260 in series (around 832 V), giving about 261 kWh — about two hours at full power.
  • Built to be paralleled: four cabinets make about 500 kW / 1.04 MWh, eight about 1 MW / 2 MWh.

Choosing the battery? 125 kW / 261 kWh cabinet makers in the Ingro directory

Where it works

Where a 125 kW / 261 kWh Battery Earns Its Keep

The sites that most often install a 125 kW / 261 kWh battery.

Factories and industrial parks

Peak shaving against the contract demand, ToD shifting and solar storage.

Campuses and hospitals

Backup that forms the site's own supply in a grid outage, with the DG as the last resort.

EV charging hubs

Fast chargers on the grid connection you have, with the battery covering coincident peaks.

Want an engineer to call you?

Leave your details. An Ingro engineer gets back to you within one business day, no obligation.

Or tell us about your site ↓
What Ingro EMS does

Ingro EMS on a 125 kW / 261 kWh Battery

The battery stores energy and the PCS converts it. The EMS decides what it earns, every control cycle.

For cabinet makers

Whose EMS goes in the cabinet you sell?

Put Ingro EMS in your cabinet as its site controller, so you sell a battery that already does peak shaving, backup and solar, with a console and reports.

Rows of cabinets

Do four cabinets act as one?

At Invertis University, four cabinets (500 kW / 1.04 MWh) run as one source: one lead and three followers.

Demand and ToD

Does it hold the limit and the tariff?

The EMS discharges to keep demand under the limit and shifts energy out of the peak window, keeping a backup reserve.

Backup and DG

What carries the site in an outage?

The battery takes the outage first; the DG starts only if the outage outlasts the reserve.

Connecting it

Which Ingro EMS Runs This Size

Ingro EMS connects to the cabinet's BMS and PCS (usually Modbus TCP or RS485), the main meter, solar inverters and DG controller. It speaks Modbus TCP, Modbus RTU over RS485, SunSpec, IEC 61850, DNP3 and OPC-UA, plus dry contacts, digital I/O and aggregator gateways. Ingro EMS is deployed on site (offline), in the cloud, or as a hybrid of the two. In on-site and hybrid deployments, site control continues with no internet connection.

Building batteries of this size? Ingro EMS for integrators, EPCs and pack makers · Every BMS, PCS and protocol

Common questions

EMS for a 125 kW / 261 kWh BESS, Answered

5 questions

An EMS that reads the cabinet's BMS and PCS and the site's main meter, and runs peak shaving, ToD, backup, solar and DG together — and that runs several cabinets as one. Ingro EMS does this with any maker's cabinet, and is made in India.

One cabinet or a row of them as a single battery. At Invertis University it runs four as one source; at Tata Power-DDL's Rohini plant it runs 124 PCS units.

Send the battery size and make, the PCS, a year of electricity bills or the load profile, and what the battery must do (peak shaving, backup, solar, DG, dispatch). An engineer replies within one business day with a scope of supply.

Yes. Pack makers and integrators can put Ingro EMS in the cabinets they sell, so each cabinet arrives with a site controller, console and reports. Talk to the EMS team about integrating your BMS and PCS.

Any that expose their data. Ingro EMS speaks Modbus TCP, Modbus RTU over RS485, SunSpec, IEC 61850, DNP3 and OPC-UA, plus dry contacts, digital I/O and aggregator gateways.

Still have a question?

Share details of your site, hardware and tariff or tender, and an engineer will answer it.

Every size

Ingro EMS for Every Battery Size

One controller and one console, from a home battery to a grid-scale plant.

Compare all sizes

Running a 125 kW / 261 kWh Battery? Put Ingro EMS on It.

Send the battery and what it must do. An engineer replies within one business day.

You send
  • 1The battery size and make, and the PCS
  • 2A year of bills or the load profile
  • 3What the battery must do: peak, backup, solar, DG or dispatch
We return
  • An EMS scope of supply
  • Which Ingro EMS package fits, and how it connects
  • Or a complete BESS proposal, if you hand over the plant

Get a Proposal for Your 125 kW / 261 kWh Battery

Tell us the battery, the PCS and what it must do. An engineer replies within one business day with the EMS scope and the package that fits.

What are you looking for?

An engineer replies within one business day. Bills, drawings or data files can go in reply to that email, or to contact@ingroenergy.com. Privacy policy