EMS for 500 kW / 1 MWh Battery StorageFour cabinets, one source.

At 500 kW / 1 MWh a battery stops being one box. It is usually four cabinets that have to behave as one supply — especially when the grid drops and they must form the site's own power.

Large C&I and plants

500 kW / 1 MWh

Power
500 kW
Energy
1 MWh
At full power
about 2 hours
Format
A row of four cabinets, or a small container
Ingro EMS-CIIngro EMS-CPAny battery, BMS or PCS
The short answer

For a 500 kW / 1 MWh BESS, Ingro EMS runs the cabinets or container as a single battery: one lead source and the rest following, so they can form the site's own supply in an outage and share the load evenly the rest of the time. It holds the demand limit, shifts energy out of the peak tariff and stores solar, with any maker's battery and PCS. Ingro EMS runs this size at Invertis University.

Ingro does not make the battery. The cabinet or container can be any maker's, with any BMS and PCS; Ingro EMS is the controller and software that decides when it charges, discharges or holds.

The battery

What a 500 kW / 1 MWh BESS Usually Is

What a battery of this size usually looks like on an Indian site.

  • Usually four 125 kW / 261 kWh cabinets (about 500 kW / 1.04 MWh), or two larger cabinets.
  • Sometimes a 10 ft or 20 ft container with a 500 kW PCS.
  • Connected at the LT or HT panel, often with rooftop or ground-mount solar and one or more DG sets.

Choosing the battery? 125 kW / 261 kWh cabinet makers in the Ingro directory

Where it works

Where a 500 kW / 1 MWh Battery Earns Its Keep

The sites that most often install a 500 kW / 1 MWh battery.

Campuses and universities

Backup for the whole campus, formed by the battery when the grid fails.

Large factories

Hold the demand limit and shift energy out of the peak window across shifts.

Hospitals

Battery first in every outage; the DG only if the outage outlasts the reserve.

Want an engineer to call you?

Leave your details. An Ingro engineer gets back to you within one business day, no obligation.

Or tell us about your site ↓
What Ingro EMS does

Ingro EMS on a 500 kW / 1 MWh Battery

The battery stores energy and the PCS converts it. The EMS decides what it earns, every control cycle.

Lead and followers

Do the cabinets form one supply?

One cabinet leads and sets voltage and frequency; the others follow, so the site sees one source, not four.

Even wear

Is any cabinet worked harder?

Power is shared by state of charge and health, keeping the cabinets level over the years.

Peak and ToD

Does it pay back between outages?

Peak shaving and ToD shifting run every day, with the backup reserve held back.

One console

Can the team see it all?

Each cabinet, the meter, solar and DG on one screen, with monthly reports.

Connecting it

Which Ingro EMS Runs This Size

Ingro EMS connects to every cabinet's BMS and PCS, the main and feeder meters, solar inverters and DG controllers. It speaks Modbus TCP, Modbus RTU over RS485, SunSpec, IEC 61850, DNP3 and OPC-UA, plus dry contacts, digital I/O and aggregator gateways. Ingro EMS is deployed on site (offline), in the cloud, or as a hybrid of the two. In on-site and hybrid deployments, site control continues with no internet connection.

Building batteries of this size? Ingro EMS for integrators, EPCs and pack makers · Every BMS, PCS and protocol

Common questions

EMS for a 500 kW / 1 MWh BESS, Answered

4 questions

One that runs several cabinets as one source, forms the site's supply in an outage, and runs peak shaving and ToD every day. Ingro EMS does this, and runs a 500 kW / 1.04 MWh battery at Invertis University.

Ingro EMS is deployed on site (offline), in the cloud, or as a hybrid of the two. In on-site and hybrid deployments, site control continues with no internet connection.

Yes. Ingro EMS reads each BMS and PCS in its own protocol and controls them as one battery.

Send the battery size and make, the PCS, a year of electricity bills or the load profile, and what the battery must do (peak shaving, backup, solar, DG, dispatch). An engineer replies within one business day with a scope of supply.

Still have a question?

Share details of your site, hardware and tariff or tender, and an engineer will answer it.

Every size

Ingro EMS for Every Battery Size

One controller and one console, from a home battery to a grid-scale plant.

Compare all sizes

Running a 500 kW / 1 MWh Battery? Put Ingro EMS on It.

Send the battery and what it must do. An engineer replies within one business day.

You send
  • 1The battery size and make, and the PCS
  • 2A year of bills or the load profile
  • 3What the battery must do: peak, backup, solar, DG or dispatch
We return
  • An EMS scope of supply
  • Which Ingro EMS package fits, and how it connects
  • Or a complete BESS proposal, if you hand over the plant

Get a Proposal for Your 500 kW / 1 MWh Battery

Tell us the battery, the PCS and what it must do. An engineer replies within one business day with the EMS scope and the package that fits.

What are you looking for?

An engineer replies within one business day. Bills, drawings or data files can go in reply to that email, or to contact@ingroenergy.com. Privacy policy