For a 5 MW / 10 MWh BESS, Ingro EMS is the plant-level energy management system that runs the containers and PCS to a schedule, a demand limit or a solar-shifting plan, alongside the plant's PPC and SCADA. It works with any maker's containers and PCS. Ingro designed the EMS and SCADA for Skipper's 35 MW solar + 5 MW / 10 MWh plant, and runs a 2.5 MW / 10 MWh plant at JSW Energy.
Ingro does not make the battery. The cabinet or container can be any maker's, with any BMS and PCS; Ingro EMS is the controller and software that decides when it charges, discharges or holds.
What a battery of this size usually looks like on an Indian site.
The sites that most often install a 5 MW / 10 MWh battery.
Shift midday solar into the evening and hold output to schedule.
Contract demand, ToD and backup at multi-megawatt scale.
Firm the solar delivered to consumers and reduce deviation.
Leave your details. An Ingro engineer gets back to you within one business day, no obligation.
The battery stores energy and the PCS converts it. The EMS decides what it earns, every control cycle.
Ingro EMS works with the existing PPC and SCADA, taking setpoints and reporting back.
Charge from solar that would be curtailed or sold cheap; discharge in the peak hours.
The EMS follows the day-ahead schedule, using the battery to hold output to plan.
For Skipper, Ingro produced the EMS and SCADA architecture, I/O schedule and vendor evaluation.
Ingro EMS connects to the container BMS, PCS, MV meters, PPC and SCADA. It speaks Modbus TCP, Modbus RTU over RS485, SunSpec, IEC 61850, DNP3 and OPC-UA, plus dry contacts, digital I/O and aggregator gateways. Ingro EMS is deployed on site (offline), in the cloud, or as a hybrid of the two. In on-site and hybrid deployments, site control continues with no internet connection.
Building batteries of this size? Ingro EMS for integrators, EPCs and pack makers · Every BMS, PCS and protocol
EMS and SCADA design for a 35 MW solar + 5 MW / 10 MWh plant.
4 questions
A plant-level EMS that runs the containers and PCS to a schedule or solar-shifting plan, alongside the PPC and SCADA. Ingro EMS-RE does this for solar and wind plants, and EMS-CI for large industry.
Yes. Ingro designed the EMS and SCADA for Skipper's 35 MW solar + 5 MW / 10 MWh plant, including the architecture, I/O schedule and vendor evaluation.
Usually yes: SCADA monitors the whole plant, the EMS decides what the battery does. Ingro EMS works with the plant's SCADA and PPC.
Send the battery size and make, the PCS, a year of electricity bills or the load profile, and what the battery must do (peak shaving, backup, solar, DG, dispatch). An engineer replies within one business day with a scope of supply.
Still have a question?
Share details of your site, hardware and tariff or tender, and an engineer will answer it.
One controller and one console, from a home battery to a grid-scale plant.
Send the battery and what it must do. An engineer replies within one business day.
Tell us the battery, the PCS and what it must do. An engineer replies within one business day with the EMS scope and the package that fits.